Max Pro MPBTS254L Bedienungsanleitung Seite 13

Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high
and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don't keep it in plastic bags to avoid humidity build-up.
• Do not dispose of electric tools, accessories and packaging together with household waste material
- in observance of European Directive 2002/96/EC on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compatible recycling facility
Out of service at switch-on
Excessive sparkling during
running
Running speed drop
Machine overheating
Cutting quality decline
Excessive mechanical
vibration
13
Table Saw MPBTS254L User Manual
ENVIRONMENT
TROUBLE SHOOTING
Shortcircuit in motor winding
Disconnection between plug and power
socket
Novoltage in supply socket
Wearout of carbon brush
Loose switching contact
Disconnection between carbon brush and
commutator
Underpressure in carbon brush spring
Excessive wearout of carbon brush
Overvoltage in supply power
Disconnection between carbon brush and
commutator
Ring fire caused by shortcircuit in rotor
winding shortcircuit
Ring fire caused by shortcircuit in
commutator segment
Decline in supply voltage
Mechanical part damage
Starting up at low speed
Partial shortcircuit in rotor
Electromotor overload
Unsmooth air outlet
Untrimmed sawnotch due to blunt saw
blade
Resin or sawdust on saw blade
Saw blade unmatched to raw material to
be sawed
Running speed drop
Improperly setting machine or omitting
rubber feet
Fastening screw in loosening
Replace stator/rotor by repairer
Put plug in power socket
Check and repair supply power
Replace carbon brush by repairer
Replace switchboard by repairer
Check connection between carbon brush
and commutator
Replace carbon brush by reparier
Replace carbon brush by reparier
Regulate supply voltage
Replace carbon brush
Check or replace rotor by repairer
Check or replace rotor by repairer
Check and repair supply power
Replace mechanical part by repairer
Regulate to high speed
Check or replace rotor by repairer
Operate with reference to instruction
manual
Clear up air duct and air outlet
Replace saw blade by repairer
Remove foreign material
Replace saw blade by repairer
Check electric motor and supply voltage
Properly resetting machine or refix rubber
feet
Screw up fastening screw
GB