Product Setup - D-Link DGS-1008D Installationsanleitung

PRODUCT
SETUP
Switch SEtUP
LED
DGS-1005D/DGS-1008D
CONNECTING THE POwER ADAPTER
Plug the power adapter into a free wall socket, then plug the other
end of the power adapter cable into the power port of the
DGS-1005D/DGS-1008D. The power LED will light up, confirming
that the device is powered up successfully.
USING THE 10/100/1000 Mbps GIGAbIT
ETHERNET PORTS
Use one of the 5 ports on the DGS-1005D or 8 ports on the
DGS-1008D to hook up your network devices with a LAN cable.
USING THE LED INDICATORS
Power Indicator
This green indicator light is on when the Switch is receiving power;
otherwise, it is off.
Link/Act
When connected to a 1000Mbps device, this LED indicator light is
green when the port is connected to a device and will blink as data
is transmitted or received.
When connected to a 10/100Mbps device, this LED indicator light is
amber when the port is connected to a device and will blink as data
is transmitted or received.
3