JJC TM Series Bedienungsanleitung Seite 8

and the release indicator lamp flashes at ONE-SECOND intervals. Meanwhile, "TIMER
ACTIVE" and "RELEASE" icons also flash in the LCD screen.
Between shots, the LCD screen shows the time remaining and "TIMER ACTIVE" icon
flashes once every second until the next photo is taken. If the speaker is ON, a beep will
sound three times at ONE-SECOND intervals before the shutter releases.
The following chart shows status of the LCD screen after the timer starts:
The diagram below shows the progress of timer:
Delay(DE), Exposure/BULB(BU) and Interval Settings (INT)
IMPORTANT:
Please ensure the Interval time is at least 2 seconds longer than Exposure time.
The diagram below shows how the speaker and the release indicator lamp work before
shutter releases.
The following diagram is a timetable of beep sounding (
delay of 5s, and exposure time of 4s, and an interval of 9s.
利用 pdfFactory Pro 测试版本创建的PDF文档
1.Flashes when timer is active
2. When shutter is open: Time remaining
until shutter closes.Between shots: Time
remaining until next shot.
3. Number of shots remaining
4. Flashes when shutter is open
) and release indicator flashing(
www.pdffactory.com
) with a