Herunterladen Inhalt Inhalt Diese Seite drucken

TimeLine strymon Bedienungsanleitung Seite 19

Delay machine
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

TimeLine
- Bedienungsanleitung
Delay Machines: dBucket
An fully nuanced re-creation of classic analog bucket brigade delay systems.
PARAMETERS:
Range:
KNOB FUNCTIONS: In dBucket, two of the knobs assume different controls than the other delay machines.
push (param)
ICE
hold (global)
DUCK
SWELL
TREM
FILTER
LO-FI
TYPE
push (bank / time)
hold (save)
FILTER: In dBucket, the fi lter control
A
makes the repeats either darker or
brighter depending on preference.
12:00 is a neutral fi lter setting. Turning
BANK DOWN
the fi lter clockwise makes the repeats
darker and they will get progressively
darker with each repeat. Increasing
the bucket loss will darken the
repeats even further. Turning the fi lter
counterclockwise makes the repeats
brighter by applying a 'post' high shelf
EQ to the wet signal.
TIPS & TRICKS:
subsequent repeats. To dial this in, set the FILTER knob at minimum and the GRIT (bucket
loss) at 12:00. Set the delay time. The bucket loss will reduce the bandwidth and fi delity of
the repeats progressively with minimum coloration from the FILTER.
REVERSE
PATTERN
DUAL
DIGITAL
dBUCKET
dTAPE
A
Varies the amount of bucket brigade circuits that the delayed signal travels
through. Single is essentially one 4096 stage bucket brigade "chip" while Double
is equivalent to two 4096 stage bucket brigade "chips" in series.
SINGLE
REC / DUB
DOUBLE
VALUE
TIME
REVERSE
PATTERN
DUAL
DIGITAL
dBUCKET
FILTER
GRIT
dTAPE
TYPE
®
push (bank / time)
hold (save)
B
A
PLAY
REC / DUB
A classic analog delay sound is one with a bright fi rst repeat and darker
ICE
DUCK
SWELL
TREM
FILTER
LO-FI
TYPE
BANK / TIME
hold (save)
BANK DOWN
TIPS & TRICKS:
dBucket delay, or a 'two-chip' dBucket delay. The one-chip
delay has half the delay range (SINGLE - 400mS) as the two-
chip delay (DOUBLE - 800mS), and experiences clock-related
artifacts at half the delay time as the two-chip delay. For
cleaner delays of 300ms to 400ms, use DOUBLE with lower
GRIT settings. For the warm, fuzzy, lofi sound of the ealiest
analog delays, use the single option with lots of GRIT and set
the Filter between 12:00 and 5:00 to taste.
REPEATS
MIX
VALUE
push (param)
ICE
hold (global)
DUCK
SWELL
TREM
FILTER
MOD
SPEED
DEPTH
LO-FI
BUCKET LOSS: In dBucket, the GRIT
TAP
knob takes the function of BUCKET
LOSS. This controls the amount of bucket
brigade "chip" loss at each stage in
BANK UP
BANK DOWN
the dBucket algorithm, from no loss at
minimum, to full noisy loss at maximum.
STOP
Set to 3:00 to get maximum distortion
hold (looper)
loss with just a hint of noise. Increasing
from 3:00 adds more noisy loss.
VALUE
TIME
push (param)
hold (global)
FILTER
®
B
The RANGE parameter selects a 'one-chip'
PLAY
TIME
REPEATS
FILTER
GRIT
®
B
BANK UP
PLAY
REPEATS
MIX
MOD
GRIT
SPEED
TAP
BANK UP
hold (looper)
MIX
MOD
SPEED
DEPTH
TAP
STOP
hold (looper)
pg 19
®
DEPTH
STOP

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis