Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TimeLine
- Bedienungsanleitung
Delay Machines: dTape
An intricate re-creation of a sliding head tape delay system.
PARAMETERS:
Tape Speed:
Choose Fast speed for a higher fi delity experience
Low End Contour: Allows for shaping the low-end from full low-end to extreme progressive high-
KNOB FUNCTIONS: In dTape, four of the knobs assume different controls than the other delay machines.
VALUE
TIME
push (param)
push (param)
ICE
REVERSE
hold (global)
hold (global)
DUCK
PATTERN
SWELL
DUAL
TREM
DIGITAL
FILTER
dBUCKET
FILTER
LO-FI
dTAPE
TYPE
®
TYPE
push (bank / time)
push (bank / time)
hold (save)
hold (save)
TAPE AGE: In dTape,
A
B
A
the fi lter knob takes on
the function of TAPE
AGE. This controls the
bandwidth of the tape
BANK DOWN
just as it would change
over time in a traditional
PLAY
REC / DUB
tape delay machine.
As regular tapes wear
out, their bandwidth
becomes limited. The
TAPE AGE control
recreates this. Set to
minimum for a fresh,
full bandwidth tape.
As the knob is turns
clockwise, the tape
will get progressively
darker.
REVERSE
PATTERN
DUAL
DIGITAL
dBUCKET
dTAPE
TYPE
BANK / TIME
hold (save)
A
or Normal for standard tape machine operation. The
Wow/Flutter (Mod Depth knob) and Tape Crinkle (Mod
Speed knob) track the tape speed for a huge range of
tape machine experiences.
FAST
REC / DUB
NORMAL
passing. With high repeats, this control is a major factor in the overall tape
machine sound.
+
| |
VALUE
REPEATS
TIME
MIX
VALUE
push (param)
REVERSE
ICE
ICE
hold (global)
PATTERN
DUCK
DUCK
DUAL
SWELL
DIGITAL
TREM
dBUCKET
MOD
FILTER
FILTER
GRIT
FILTER
SPEED
GRIT
dTAPE
LO-FI
LO-FI
TYPE
®
push (bank / time)
hold (save)
TAPE BIAS: In dTape,
B
TAP
A
the GRIT knob takes on
the function of TAPE
BIAS. This control adjusts
tape machine bias,
BANK UP
BANK DOWN
from under-biased to
over-biased. Bias sets
PLAY
REC / DUB
the dynamic range and
headroom of the delay
signal. Higher bias levels
result in reduced echo
volume and limited
headroom. Lower bias
settings result in the
cleanest echoes with the
most headroom. For an
optimally biased tape
machine set to 9:00. For
an under biased tape
machine with extra high
frequency response set to
minimum.
using minimum bias to tame the regenerative high frequencies.
push (param)
ICE
hold (global)
DUCK
SWELL
TREM
FILTER
LO-FI
BANK DOWN
-
REPEATS
VALUE
MIX
REPEATS
TIME
push (param)
hold (global)
SWELL
TREM
MOD
DEPTH
SPEED
FILTER
DEPTH
FILTER
GRIT
®
®
TAPE CRINKLE: In dTape,
TAP
B
the SPEED knob takes
on the function of TAPE
CRINKLE. This control
adjusts the amount
BANK UP
BANK DOWN
BANK UP
and severity of tape
irregularities, including
STOP
STOP
PLAY
PLAY
friction, creases, splices
hold (looper)
hold (looper)
and contaminants. Tape
Crinkle characteristics
track accordingly to tape
speed. Set to minimum
for a fresh, clean tape. Set
to maximum for a tape
that has been mangled
and chewed for years.
TIPS & TRICKS:
Reduce the Repeats knob if necessary when
FILTER
GRIT
®
TIPS & TRICKS:
effects of wow/fl utter and tape
crinkle will track to the Tape Speed
parameter. Select FAST for higher
B
fi delity, including wider playback
head frequency response. Select
NORMAL for a warmer tape sound.
High SPEED and DEPTH knob settings
(tape crinkle and wow/fl utter) with
NORMAL Tape Speed will produce the
characteristics of an old un-serviced
PLAY
tape machine.
REPEATS
TIME
MIX
MOD
GRIT
SPEED
SPEED
DEPTH
WOW & FLUTTER: In
B
TAP
dTape, the DEPTH knob
takes on the function of
WOW & FLUTTER. This
control varies the amount
BANK UP
of mechanically related
tape speed fl uctuations.
STOP
This also results in
hold (looper)
natural tape machine style
modulation. Turn the knob
fully counter clockwise
for a perfectly tuned,
cleaned and serviced tape
machine. Turn the knob
fully clockwise to hear the
sound of a tape machine in
need of service. In between
the extreme settings, a
natural tape modulation is
achieved.
MOD
SPEED
DEPTH
The mechanical
TAP
BANK UP
STOP
hold (looper)
MIX
MOD
DEPTH
TAP
STOP
hold (looper)
pg 18
®
Werbung
Inhaltsverzeichnis
