Philips LivingColors 69164/31/PH Handbuch Seite 9

4. Selecting and adjusting individual lamps
If you have connected several lamps to this remote control, you can control them all together or
individually. In order to control a lamp, you need to select it. You can do this using the light selection
buttons. When selected, the lamp will flash and the light selection indicator on the remote control (light
bulb) will light up. This means you can now adjust the selected lamp individually.
When no lamp is selected (light selection indicator is off), all your adjustments will apply to all lamps
connected to the remote control (for example, you can dim all lights in the room).
5. Frequently asked questions
What to do if...
o A lamp is not providing light
Check the connections of the cord to the lamp. Check that the plug is correctly
o
placed in the wall socket.
o Remove the power cord and then put it back. If the lamp briefly turns on and then
goes off, use the remote control to switch it back on.
o A lamp is not responding to the remote control
Link the remote to the lamp by following the procedure described in section 1 of
o
this manual.
o Check the batteries in the remote control. The batteries should be correctly loaded
(+ and -) and should be charged. If the remote control is still not working, try
replacing the batteries.
Make sure that the lamp you are trying to connect to the remote control has a
o
SmartLink logo on the box. Only products with a SmartLink logo on the box can be
connected to this remote.
o Buttons are flashing after I have used the remote control
o This means that the batteries in the remote control are (almost) empty and need to
be replaced.
o I cannot start the automatic colour changing mode
It could be that the remote control did not understand your "sweep" movement.
o
Please try again, making sure that your finger is on the colour wheel during the full
circle movement
o My question is not listed here
Please check the extended online FAQ section on our website: www.philips.com/livingambiance. If
you still cannot find an answer to your question, please contact Philips for assistance (see section 6
"Additional support").
9