Initial Operation; Installation; Preparations At Your Pc - Medion AKOYA P55015 Bedienungsanleitung

Initial operation

Important!
Before starting up please make sure that you read „Safety instructions" on page 25

Installation

Attach the monitor stand as shown in the illustration. Carry out this step before connecting the mon-
itor.
Remove the monitor stand as shown in the illustration.

Preparations at your PC

If you have been operating your computer with a CRT monitor, it may be necessary to make some
adjustments. This is necessary if your previous monitor used settings for its operation that will not be
supported by your new monitor.
The monitor displays up to 1920 x 1080 pixels. This resolution corresponds to the physical resolu-
tion. Monitors achieve full image quality with the physical resolution. If you change to a display with
different settings, the display may not, in certain circumstances, appear in the full screen area.
Distortions can also occur, especially for fonts.
Before you connect the new monitor, use your old PC monitor to set a resolution and image frequen-
cy that is supported by both monitors.
Then shut down the PC and connect the new monitor.
After rebooting the PC, you can adjust the monitor settings for the device as described.
Assembling the monitor stand (similar to figure)
Removing the monitor stand (similar to figure)
DE
EN
FR
IT
ES
NL
DK
27