EN
Wearing options
The
distyNotruf
different ways:
28
can be worn on the body in three
NEO
Option 1:
Attachment the
to the wrist
The wrist strap is pre-assembled in
the factory. The
should be attached to the wrist so that
the charging socket faces the body.
The shorter end of the strap should
be pulled through the opening of the
other half of the strap and tightened
against the wrist. Both pins on the
closure must be pressed into the
opposing holes and clicked into
place.
In case of disassembly, from the
outside of the hole, press with a pin
or paper clip on the spring bolt
so that this is pressed together and
can be removed from the hole. If the
length and closing mechanism of the
pre-assembled armband are not
appropriate, you can replace it with
the second armband provided.
distyNotruf
distyNotruf
NEO
Operating instructions
NEO