Subscribe And Pre-Programm The Alarm Numbers - Disty distyNotruf NEO Bedienungsanleitung

EN

Subscribe and pre-programm the alarm numbers

The "Programmier App" (Programmer App) can be used
to simply and quickly register the device with a base station
and pre-programm the alarm number(s).
Simply connect the distyNotruf to a PC using the
NEO
USB cable.
With the "Programmier App" (for Windows 7/8/10), which
can be obtained from www.disty.de, you can pre-programm
the telephone numbers on the device and register distyNotruf
with your DECT phone. The "Programmier App" is also
NEO
used to deregister the device or reset individual parameters.
All configuration options can be found in the user guide for
the "Programmier App", which you can download as a PDF
together with the installation file.
If no PC is available at hand, you can also register the
device and pre-programm the alarm number(s) by phone
(see chapter "Tips & Tricks", from page 30)
is now operational.
distyNotruf
NEO
Operating instructions 23