Aurora CALYPSO DIGITAL Gebrauchsanleitung Seite 18

Frost Free
• The product measures room temperature and lights up when the temperature level drops below 7 ° C.
• The icon appears on the display to confirm that this mode is activated.
• The thermostat is automatically set to 7 ° C and can not be changed.
• The heating power setting is automatically set to AUTO and can not be changed.
Timer
• The product works to heat the environment, reach and maintain the set temperature for a predetermined time.
• The Icon appears on the display to confirm that this mode is activated.
• To set the Timer Mode:
- Press the "MODE" key until you enter Timer mode;
- Use the "+" and "-" buttons to choose the operating time period among 0.5-1-2-4-8 hours;
- Press the "SELECT" button to confirm the operating time period.
• The product operates in AUTO mode and the display switches between the time remaining and the set tempe-
rature.
• At the end of the set operation period, the fan heater switches to standby mode.
Daily Programming
• The product works to reach and maintain the set temperature for each hour of the day according to program
defined by the user.
• The icon appears the display to confirm that this mode is active, the red led under the "PROG" key lights up.
• To customize the program, proceed as follows:
Press the "PROG" key for 5 "
5"
Use the "MODE" button to change
the desired temperature between
Frost Free and Comfort
Press the "+" key to select the next
hour
Display indicates time 00 (00:00 to
00:59) and the set operating mode:
Press "SELECT" to confirm
Proceed as shown above to set
the desired temperature using the
"MODE" key and confirm with the
"SELECT" key
18
or