Product Description - Aurora CALYPSO DIGITAL Gebrauchsanleitung

gulations in force in the country of installation.
• When you use the product , never place the power cable around
the grille because this could cause a damage to the power cable
and make the heater dangerous (picture 6).
• Do not use this heater in the immediate surroundings of a bath, a
shower or a swimming pool;
• Do not use this heater if it has been dropped;
• Do not use if there are visible signs of damage to the heater;
• Use this heater on a horizontal and stable surface;
• WARNING: Do not use this heater in small rooms when they are
occupied by persons not capable of leaving the room on their own,
unless constant supervision is provided.
• WARNING: To reduce the risk of fire, keep textiles, curtains, or
any other flammable material a minimum distance of 1 m from the
air outlet.
2. P
roDuct DescriPtion
• With reference to picture 4:
A. Handgrip
B. Air outlet grid
C. Control panel
D. Air inlet grid
• The control panel includes the following items (picture 5):
A. On/Stand-by
B. Decrease
C. Mode selector
D. Daily programming
E. Increase
F. Power selector
G. Multifunction display
H. Functioning pilot light
I. Programmed mode light
3. u
sing the Fan heater
• Power on and Stand-by
The product is powered as soon as it is plugged into a power outlet. If the product is new or there has been a power
failure longer than 5 minutes, the time icon flashes to activate the time setting procedure.
By removing the plug from the socket, the electronic board power is also interrupted with the consequent loss, after
about 5 minutes, of all stored parameters and restoring the factory settings.
We recommend disconnecting the plug from the power outlet only if the product is not being used for long periods and
use the Power / Standby button (Figure 5-A) for short-term shutdowns so you do not lose the stored settings.
15