Operating Mode Selection - Aurora CALYPSO DIGITAL Gebrauchsanleitung

STAND-BY
In any operating mode, press the
"STAND-BY" key to turn off the fan.
•

Operating Mode Selection

You can select one of the following 5 operating modes:
Icon Mode
Cold air
Comfort
Frost free
Timer
Daily programming
A further pression of "MODE" button
allows you to select the first 4 modes
of operation
PROGRAMMING mode has its own
specific key that enables it to be
switched on quickly and easily.
Cold air Mode
• The product works as a fan and the heating elements are switched off.
• The icon appears on the display to confirm that this mode is activated
• Thermostat is excluded and does not affect the fan operation
Comfort Mode
• The product works to heat the environment, reach and maintain the set temperature.
• The icon appears on the display to confirm that this mode is activated.
• Thermostat must be set using the "+" and "-" keys to define the comfort temperature you want.
• by pressing the "SELECT" button, you can choose among 3 different settings:
Comfort 1000W
Comfort 2000W
Auto Comfort
Description
The product works as a fan and the heating elements are
switched off.
The product works to heat the environment, reach and maintain
the set temperature.
The product measures room temperature and lights up when the
temperature level drops below 7 ° C.
The product works for a predetermined time to reach and main-
tain the set temperature.
The product works according to the user-programmed time
schedule.
The product works at low power to limit power consumption.
The product works at maximum power to quickly reach the desired temperature
The required power is automatically chosen to optimize Performance and
consumption.
17
The display shows the current time.
The backlight turns off 30 " after
pressing the last button
Operating modes are activated in
the following sequence:
Icons light up on the display.
The following icon will appear
on the display.
A red led under the "PROG" key
lights up red.