ASUP Enviro Dustkiller H 230V/50Hz EU Betriebsanleitung Seite 26

ASUP Enviro Dustkiller
Rules for asbestos abatement
in the Federal Republic of
Germany
Maintenance, cleaning and
repair
24
In accordance with TRGS (Technical Rules for Hazardous Substanc-
es) 519, the device must only be employed for asbestos abatement
and rehabilitation work on components and equipment or machinery
and devices in enclosed spaces where such work is of minor extent
or involves low exposure
• Ancillary work in accordance with TRGS 519, No. 2.4
• Clearance of spaces contaminated with asbestos
• Set-up of construction sites where it is not possible to prevent the
release of asbestos fibres
• Cleaning of rooms or objects contaminated with asbestos dust
During the following work, ensure that dust is not unnecessarily
spread around. Wear a P2 bresthing mask.
CAUTION: In the case of asbestos abatement wear additional sin-
gle-use clothing.
Clean the water level limiting device regularly and check for signs of
damage.
Only carry out maintenance work described in the operating instruc-
tions.
Always pull the out the mains plug before cleaning and maintenance
of the vacuum cleaner.
During maintenance and cleaning, handle the vacuum cleaner in
such a manner that there is no danger for maintenance staff or other
persons.
In the maintenance area
1. Use filtered compulsory ventilation
2. Wear protective clothing
3. Clean the maintenance area so that no harmful substances get
into the surroundings.
Before removing the vacuum cleaner from the area contaminated
with harmful substances:
1. Clean the outside of the vacuum cleaner, wipe it clean or pack
the vacuum cleaner in well sealed packaging
2. and avoid spreading deposited harmful dust.
After use, in asbestos contaminated areas, the machine must be
cleaned by an authorised person according to TGRS 519.
During maintenance and repair work all contaminated parts that
could not be cleaned satisfactorily must be:
1. packed in well sealed bags
2. disposed of in a manner that complies with valid regulations for
such waste removal.
At least once a year, an
must perform a technical inspection including filters, air tightness
and control mechanisms. According to AA.22.201.2 appliances in
class H must have their filtration efficiency checked once a year. If
the effiency of the filter does not fulfil the requirements for dust class
H, the filter must be replaced, and the new filter must be tested ac-
cording to AA.22.201.2.
*) Optional accessories / Option depending on model
ASUP technician or an instructed person
Original Instruction