General Instructions - be cool DUPLO PRO Gebrauchsanweisung

GB
DUPLO PRO
Your new DUPLO PRO by BABYNURSE is a safety seat designed to protect your baby in the car from
the day they are born to approximately 1 years of age (up to 13 Kg in weight).
DUPLO PRO has passed the demanding safety tests of European Regulation ECE 44/04 for groups 0
and 0+.
DUPLO PRO is compatible with most car seats. However, when the car manufacturer states that
the seats are suitable for the installation of "Universal" type seats, this means that there is total
compatibility.
You can also use your DUPLO PRO with any of the BABYNURSE chassis that has the PRO-FIX system.

GENERAL INSTRUCTIONS

In order to protect your baby adequately and to
ensure their comfort and stability in the car, the
following instructions must be strictly followed:
• Your DUPLO PRO safety seat can be installed in
both the front seat, if it does not have an airbag,
and in the back seat of your car. Either way, we
advise you to install it in the back seat. If you
position it in the front seat of the car, this must
NOT have an AIRBAG, or the airbag must be
disconnected
• It is only suitable for cars fitted with three anchoring
point automatic belts, approved according to
Regulation ECE-16 or other equivalent rules. DO
NOT use with a two anchoring point belt.
• Not all safety systems are exactly the same, so we
advise that you check your DUPLO PRO in the car
in which it is going to be fitted.
• It is very important not to use second-hand
products, as BABYNURSE can only guarantee
complete safety with items used by their first
buyer.
• BABYNURSE recommends that you replace
your DUPLO PRO safety seat with a new one if
it has been subjected to violent stresses in an
accident.
• Check that all the belts are in their correct
position and properly adjusted to your DUPLO
PRO. Ensure that no belt is coiled.
• For your baby's proper development, we advise
you not to over-use the safety seat in the
seated position on long journeys. Let the baby
rest frequently in a Moses basket or bed in the
18 reclining position.
IM1268_DUPLO PRO.indd 18
1 Getting to know the DUPLO PRO safety seat
Your DUPLO PRO safety seat has been designed
taking into account the latest advances in terms of
safety and it has been tested under the toughest
conditions. It has the following features:
Installing in the vehicle:
• Belt slots underneath the shell to permit
installation in cars where the belts are shorter. It
also leaves the area around the baby's feet free.
• New anchorages for the reclining position to help
with installation.
Comfort and safety for the baby:
• Integrated 5-point straps, with a greater fastening
area, so distributing loads on the baby better in
the event of an accident.
• Aeration in the shell to permit transpiration.
• Impact-absorbent material over the entire surface
in contact with the baby.
6/9/11 12:34:15