Coltech TD9511-3 Bedienungsanleitung Seite 4

5) Service
a) Repairs and service should only be performed by qualified tradesmen, and
only with original spare parts. This guarantees that the safety of the power tool
is maintained.
Specific safety warnings for multi-tools
• This electric hand tool is intended for sawing, sanding, polishing and cutting.
Read all safety warnings, instructions, illustrations, and specifications
provided with this tool. Neglecting to follow all of the instructions listed below can
result in electric shock, fire and/or serious injury.
•
Do not use accessories which are not intended to be used with this tool and
which are not recommended by the manufacturer. Even if the accessory can be
attached to your power tool, there is no guarantee that it can be used safely.
• Wear personal protective equipment. Depending on how you use the machine;
use a visor/face protection or safety glasses. If necessary use a mask,
ear protection, gloves, and apron/work clothing to protect you from small
shards of metal or splinters from the work object. The eye protection you use
must be able to protect against flying debris produced in different working
positions. The breathing protection should be able to filter any particles
produced by the work. Prolonged exposure to high levels of noise can result in
hearing damage.
•
Keep children at a safe distance from the work area. Everyone who visits
the place of work must wear personal protective equipment. Debris from
the workpiece or from a damaged accessory can fly off and injure people outside
of the immediate work area.
•
Only hold the power tool by its insulated gripping surfaces when working in
situations where the tool could cut through hidden cables or its own mains lead.
Tools which come in contact with a live cable can electrify metal parts of the power
tool and subject the user to an electric shock.
• Regularly clean the motor's ventilation ports. The motor's fan pulls in dust,
which gets inside the outer casing and a build up of this collected metal dust can
lead to electrical dangers.
• Do not use the power tool near flammable material. Sparks can easily ignite
flammable material.
• Do not use accessories, which require liquid coolants. The use of water or
other liquid coolants can result in electric shock or electrocution.
Specific safety instructions for sanding
• Extra caution should be taken when sanding lead paint, wood, metal or other
materials which produce toxic dust. Make sure any bystanders in the work area
are well protected.
• Remember that dust caused by sanding can be very flammable when mixed
with air.
4