Philips BT405 Bedienungsanleitung Seite 9

General
Charging
Charging with the supply unit BT405
Optimizing the lifetime of the rechargeable battery
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Charge the appliance fully before you use it for the
first time and after a long period of disuse.
Charging takes approximately 10 hours. A fully
charged appliance has a cordless operating time
of up to 35 minutes.
1 Make sure the appliance is switched off.
2 Put the small plug in the appliance and put the
supply unit in the wall socket.
The charging light on the supply unit lights up
green to indicate that the appliance is charging.
Note: The charging light on the supply unit does
not change color and does not go out when the
appliance is fully charged.
3 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
When you have charged the appliance for the first
time, we advise you to use it until the battery is
completely empty. Continue to use the appliance
until the motor almost stops running during a
session. Then recharge the battery. Follow this
procedure at least twice a year.
9
English