Maintenance - BGS technic 63400 Bedienungsanleitung

CONTINUITY TEST
1. Connect the red test lead to "VmAΩ" jack and the black test lead to "COM" jack.
2. Set the Function/Range switch to " •)))" range.
3. Connect the test leads to the two terminals of the circuit to be tested. If the resistance is lower
than about 50Q, the built-in buzzer will sound.
Note: To avoid electric shock to you or damage to the meter, disconnect circuit power and discharge
all capacitors before continuity test.
SIGNAL OUTPUT
1. Set the Function/Range switch to"
2. A test Signal will be Output between "VmAΩ" and "COM" jacks, the Output voltage is approx. 3V
p-p with 50KOhm impedance.

MAINTENANCE

Before opening the case, always disconnect the test leads from all live circuits. To continue protection
against fire, replace fuse only with the specified voltage and current ratings: F 250mA / 250V (Fast
Blown), 05 x 20mm c Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents.
BATTERY AND FUSE REPLACEMENT
If" "appears on the LCD, it indicates that the battery should be replaced. To replace the battery,
remove the screws on the back cover, and replace the exhausted battery with a new one of the same
ratings. Reinstall the back cover and the screws. Fuse rarely needs replacement and is blown
generally as a result of operator's error. To replace the fuse (F 250mA/250V), remove the screws on
the bottom of the case, simply remove the old one, and replace it with a new one of the same ratings.
Reinstall the back cover and the screws.
ACCESSORIES
Manual: 1 piece
Test leads: 1 pair
SW-Stahl und Werkzeugvertriebs GmbH
L e v e k r u s r e t S a r s s e 6 5
D 4 - 2 8 9 7 R e m s c h e d i
" range.
DISPOSAL OF THIS ARTICLE
Dear Customer,
if you at some point intend to dispose of this article, then
please keep in mind that many of its components consist of
valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check
with our local council for recycling facilities in your area.
Tel. +49 (0) 2191 / 46438-0
F ax +49 (0) 2191 / 46438-40
- E M a : l i n i o f @ s w s a t l h d . e