Safety And Connections; Utilization For The Purpose Intended; Mains Connection - Studer D19 MultiFeed Bedienungsanleitung

Redundancy Input Option:
1.3

Safety and Connections

1.3.1 Utilization for the Purpose Intended

1.3.2 Mains Connection

Power Cable:
Date printed: 13.09.00
AES IN
4
AES IN
(redundant)
4
The Studer D19 MultiFeed is designed for professional use. It is pre-
sumed that the unit is operated only by trained personnel; servicing
must be performed by qualified experts.
The electrical connections may be connected only to the appropriate
voltages and signals specified in this manual. Please consult the Safety
and EMC sections at the very beginning of this manual.
There is no need to select a specific mains voltage setting because the
unit can be operated on mains voltages from 100 through 240 V
60 Hz.
Caution! Repair work may only be performed by a trained service technician.
The primary fuse inside the unit must be replaced by a spare fuse of
exactly the same type.
The unit must not be opened by the user – risk of a severe electric shock
hazard!
The supplied mains socket has to be fitted with a mating power cable
incl. plug by an electrician, if your local Studer agency or your dealer
should not have added a fitting power cable.
Please consult the Safety section at the very beginning of this
*
manual!
AES
SFC
REC
on/off
(jumpers)
AES
SFC
REC
ERROR
D19 MultiFeed
4
AES
TRANS
SYNC
REC
SYNC IN
AES
TRANS
Come in! E 1/3
AES OUT
SYNC IN
, 50 to
AC