JL Audio DOMINION d108 Bedienungsanleitung Seite 18

RECEIVER / PROCESSOR
PRE OUT
FRONT L REAR CENTER
FRONT R REAR SUB
WARNING! TURN OFF THE DOMINION™(s) AND ALL OTHER EQUIPMENT
IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
Page 18
LP Filter
off | on
DOMINION™ REAR PANEL
SYSTEM CONNECTION DIAGRAM 1:
One Dominion™ to Home Theater
Receiver or Home Theater Preamp/
Processor
Most home theater receivers and
preamp/processors provide a single
(mono) subwoofer line-level output.
When connecting a mono
subwoofer output to your Dominion™, you
only need to connect to one of the
subwoofer's "Line Inputs" (Left or Right).
Use a good-quality audio interconnect
cable with RCA-type connectors.
In most cases, you will use
the bass management/crossover
features of the receiver or preamp/
processor. This requires that the "LP
Filter" switch of your Dominion™
is placed in the "Off" position.
WARNING
| d108 & d110