Before First Use - Grundig UC 5020 Bedienungsanleitung

OPERATION _____________________________

Before first use

Remove the transparent
7
protection sleeve on the On/Off
switch D panel before using the
appliance for the first time.
Cleaning sensitive and
small objects
1
Open translucent lid
the stainless steel tank
water.
Caution
Do not exceed the "MAX"
7
marking.
Do not operate the appliance
7
without filling with water,
otherwise it will get damaged.
Use only clear, cold water.
7
2
Put the object in the plastic
cleaning basket
3
Place the plastic cleaning basket
into the stainless steel tank
G
and fill
A
B with
.
G
.
B
4
Close the translucent lid
5
Plug the power cord
suitable power outlet.
– Power on indicator light
illuminates for a few seconds
and disappears.
6
Press the On/Off switch
– The power on indicator
light illuminates and the
E
cleaning operation starts.
It takes 5 minutes for the
appliance to finish cleaning
operation.
7
When the cleaning operation
finishes, the appliance
automatically stops and the
power on indicator light
disappears.
8
After using the appliance,
disconnect the power cord
from the power outlet.
9
Open the translucent lid
take out the plastic cleaning
basket G with the object. Pour
out the water and clean the
appliance. See the "Cleaning
and care" section.
Notes
You can put multiple of jewelries
7
at the same time.
Put the glasses in the plastic
7
cleaning basket
the glasses in upward position.
A .
into a
C
E
.
D
E
C
A and
G
always with
ENGLISH 23