Mulching; Cable Adjustment; Height Adjustment; Start And Stop Of Engine - Texas A/S XTB 46 TR/W Bedienungsanleitung

Mulching

When using mulching, the mulching plug needs to be
fitted into the rear discharge hole.
Notice, that when using mulching, the collector box must
always be dismounted.
The rear discharge guard will go down at keep the
mulching plug in place.

Cable adjustment

Both cables can be adjusted.
The stop cable can be adjusted at the engine. The cable for the self-propelling function
can be adjusted using the cable near the top handle.

Height adjustment

The lawn mower comes with central height adjustment.
Use the handle near the right rear wheel to adjust the cutting height.

Start and stop of engine

REMEMBER: Always check engine oil before start!
Oil level must be between min. and. max on the oil stick.
Fill with SAE-30 oil.
Use only unleaded Octane 95 fuel in the engine. Never fill up the tank completely.
Pull the handle (B), which loosens the knife brake,
towards the handle and pull the starting cord.
Let the starting cord carefully return to the engine..
B
Pull the handle (C) up to activate the self-propelling
function.
C
The handle (B) must be pulled towards the steering
handle while using the machine. When the handle is
released, the engine (and the knife) stops in 5 seconds.
B&S engine: Please see the separate B&S engine manual.
20