Mulching; Grass Collector; Cable Adjustment - Texas A/S SPD 50 TR/W Bedienungsanleitung

Cable
The clutch cabel (a) will from delivery be dismounted from the metal bracket (b).
To fit the cable, the metal bracket (b) must be pulled out of the hole in left side of
handlebar. See fig. 1.
Then fit the s-hook from cable into the hole in metal bracket. See fig. 2.
At last, the metal bracket must be pushed back into the hole in handle bar. Fig. 3.
Check that it works before start engine.
Fig. 1 Fig. 2 Fig. 3
a
b

Mulching

When using mulching, the mulching plug needs to be
fitted into the rear discharge hole.
Notice, that when using mulching, the collector box must
always be dismounted.
The rear discharge guard will go down at keep the
mulching plug in place.

Grass collector

Assemble the grass catcher as shown.
Mount the black metal bracket inside the cover.
Attach the black collecting tray to the cover, as
shown.
Clip the white clip attached to the bag over the black
bracket.

Cable adjustment

Both cables can be adjusted.
The stop cable can be adjusted at the engine. The cable for the self-propelling function
can be adjusted using the cable near the top handle.
22