VAPANION Polar Bedienungsanleitung Seite 78

VAPANION
SELECTION & OPERATION OF THE MENUS
POLAR
- Under"POWER-SET" you can adjust the wattage for the preheat function in the TC mode
within a range of 5 to 220 watts.
- Under "CCT-SET" you can create an individual temperature curve, which will make the device
change to the CCT mode. By pressing the "UP"/"DOWN"-adjustment buttons, adjust the
temperature for the first 0.5 seconds of your puff. Press the fire button to confirm your settings
and to change to the next bar for the next 0.5 seconds. Continue that way, until you created an
individual curve for six seconds.
- Under "LOCK | UNLOCK" you can lock or unlock the resistance value for temperature
measurement.
Note
This function should only be used at room temperature, to ensure that the correct "base resistance"
is locked. Otherwise, wrong measurement results may occur, which can also have a negative effect
on the protective functions.
Under "EXIT" you have the possibility to leave the TC submenu. Navigate by pressing the
"UP"/"DOWN"-adjustment buttons. Finally, press the function button to confirm your settings and
return to the start screen.
76