Bypass Mode - VAPANION Polar Bedienungsanleitung

EXPLANATIONS TO THE VAPING MODES
CCT Mode (Custom Curve of Temperature)
In CCT mode you have the possibility to create a individual temperature curve for temperature-
controlled vaping. For that, you have a period of time from 0.5 to 6 seconds in steps of 0.5 seconds
on the x-axis and a temperature range of 100 °C to 315 °C (200 °F to 600 °F) in steps of 5 °C
respectively 10 °F on the y-axis available.
TCR Mode (Temperature Coefficient of Resistance) (M1 | M2)
The TCR mode allows you to select different temperature coefficients of resistance for the coil or to
operate with different TCR values. Depending on the atomizer head used, the temperature can range
between 100 °C and 315 °C (200 °F to 600 °F). For individual TCR profiles you have two memory
locations (M1 | M2) available.
Please note that you must determine the resistance of the atomizer head you are using before
using it for the first time in temperature modes.

Bypass Mode

Bypass mode is a direct output mode in relation to voltage.
The output power is regulated automatically in relation to the current battery status.
VAPANION
POLAR
73