Disposal; Returns; Information - Gemü 1214 Einbau- Und Montageanleitung

7

Disposal

Disposal of the individual components
should be separated by materials (materials
see below), circuit boards with electronic
components and travel sensor placed in
electronics scrap.
1214
8

Returns

Clean the electrical position indicator.
G
Request a goods return declaration form
G
from GEMÜ.
Returns must be made with a completed
G
goods return declaration.
If not completed, GEMÜ cannot process
PEEK
credits or

repair work

but will dispose of the goods at the
operator's expense.
PSU
PA 6.6
1.4305
9

Information

1.4104
Should there be any doubts or
1.4104
misunderstandings in the preceding text,
the German version of this document is the
authoritative document!
24 / 28
Note for returns:
Legal regulations for the protection
of the environment and personnel
require that the completed and
signed goods return declaration
is included with the dispatch
documents. Returned goods can
be processed only when this
declaration is completed.
Note on staff training:
Please contact us at the address
on the last page for staff training
information.