Maintenance & Troubleshooting; Care & Maintenance; Troubleshooting - THINK GIZMOS TG659 Bedienungsanleitung

4. MAINTENANCE & TROUBLESHOOTING
4.1 Care & Maintenance
● Keep the RC Digger clean by wiping it with a soft dry cloth.
Keep away from exposure to direct sunlight for extended periods and keep away from
●
direct heat sources.
Remove batteries when not in use for an extended time.
●
● Do not drop on a hard surface or disassemble the unit.
● Do not immerse in water.

4.2 Troubleshooting

If you are experiencing problems with your Digger, here are some quick and easy checks
that you can carry out, which may help to resolve the problem.
No Response from the Digger:
● Please ensure that the Digger is in range of the controller and that there are no
obstructions between the controller and the Digger which could block the signal.
● Make sure that the batteries in the Controller are fitted correctly and that they have
not reached the end of their life. If required replace the batteries in the controller.
● Make sure that the batteries in the Digger are fitted correctly. If required replace the
batteries in the Digger.
● Please ensure that the power switch on the Digger and Controller is switched to 'ON'.
The Digger does not travel straight:
● Please adjust the steering using the steering adjustment control located on the
underside of the Digger.
The Digger Starts to Run Slow:
● The batteries in the Digger are running low, please insert new batteries.
If this does not resolve your issue. Please contact ThinkGizmos via email:
and we will endeavor to resolve your problem as quickly as possible.
help@thinkgizmos.com
6