Proper Use; Transport / Storage / Wintering / Preservation; Unpacking; Improper Use - Pentair Water 5P2R Montage- Und Betriebsanweisung

2.3.2 Other safety components and regulations
Instructions oh the handling and use of electrical equipment
Work on electrical components must be carried out only by
a qualified electrician in accordance with accepted techni-
cal practice.
The operating instructions provided by the motor manufac-
turer must also be followed at all times.
The electrical equipment of the swimming pool pumps must
be inspected and checked regularly. Faults such as loose
connections or singed cables must be rectified immediately.
3.

Proper use

The pumps are designed for the pumping of clear or slightly
cloudy water in swimming pools and whirlpools, and for wa-
ter circulation in supply operation. In case of other media or
applications, the exact usage specification must be discus-
sed with the manufacturer.
The swimming pool pumps must only be used as specified in
these operating instructions. Any other form of use consti-
tutes improper use. In this case, the manufacturer accepts
no liability for any resulting damages.
The swimming pool pumps have been designed and con-
structed to the latest state of the technology, and are com-
pletely safe and reliable if used in accordance with these
operating instructions and any other specific system or
operating requirements.
Nevertheless, their use may still give rise to danger to life
and limb of the operator or other persons, or damage to the
swimming pool pumps and other equipment.
Modifications to the swimming pool pumps are possible in
certain cases. In such cases, advance, written approval
must be obtained from the manufacturer.
The manufacturer accepts no responsibility in the
following cases:
Failure to observe the information in these operating
instructions;
Use of spare parts or components not approved by
the manufacturer;
Incorrect operation;
Removal, modification or deactivation of safety devices;
Modification of functions;
Non-approved modifications to the swimming pool
pumps;
Improper performance of maintenance work;

Improper use.

3.1 Improper use
The swimming pool pumps may cause dangers if used im-
properly or not for their intended purpose.
Under no circumstances must the
swimming pool pumps be used for:
aggressive fluids
inflammable fluids
toxic fluids
The operating instructions must be available to the user,
maintenance and repair personnel throughout the complete
usage period of the swimming pool pumps. Keep a copy of
these operating instructions with the swimming pool
pumps! Have a copy of these operating instructions availa-
ble during all maintenance and repair work!
The information in the operating instructions
must be followed at all times! Any other form of
use of the swimming pool pumps will invalidate
any liability or guarantee on the part of the manu
facturer!
Harmful materials must be disposed of so as not
to cause any danger to persons or the
environment. The applicable legal regulations
must be observed.
4. Transport / storage /
wintering / preservation
The complete delivery should be checked immediately on
arrival for completeness and any possible transport dama-
ge. Complaints will only be accepted if they are reported to
the haulier or manufacturer on the day of delivery.

4.1 Unpacking

The packaging material should be reused if possible, or dis-
posed of in accordance with local regulations.
Dispose of packaging material and insulation
properly. National regulations must be observed.
4.2 Storage / wintering / preservation
Extended intermediate storage in an environment
with high air humidity and changing
temperatures should be avoided. Condensation
may damage the motor windings and other metal
parts. This will invalidate the guarantee.
The pump may also be damaged if exposed to
frost. This will also invalidate the guarantee. Anti-
freeze must not be used, since this can cause
damage to plastic parts.
In the event of risk of frost, the pump should be drained. To
do this, open the drain plug and allow the water to drain out
of the pump. The piping system should also be emptied
18
> <