Bestial Wolf Booster b12 Anleitung Seite 15

To carry out the turning maneuvers with the handlebar, the scooter has a steering mechanism that has
a bearing system, this bearing system has a logical and normal wear caused by the scooter's use, as a
result you should revise them too, carrying out the appropriate checks.
When turning the handlebar from left to right, it has to make it softly, in any other case or if you find
that exists an excessive free movement in the mechanism, strange noises or any other abnormality, you
should proceed replacing the steering system, as a result we recommend you to keep in contact with
your dealer.
Pieces such as the breaking mechanism, the grips and other elements from the scooter, are exposed as
well to a constant wear due to the scooter's use, we want to insist on a regular maintenance to increase
both the security and the scooter's useful life.
The self-locking nuts and other mounts could lose effectiveness with the passing of time, check specially
the Allen screws from the clamp, that joins the handlebar and the fork. Check the adjustment for those
screws regularly, to do this use the 5mm Allen screw. If you have any doubt during the checking or
replacements with any of them, please keep in contact with your dealer.
When doing the replacement of any scooter's pieces, make sure of using always original pieces.
This scooter has been designed and manufactured combining all its pieces and parts so that the
use of non original pieces could affect negatively such as the security in using the scooter as its
durability. Also, neither make any modification to the original scooter nor any of the pieces or parts
of the scooter. The repair or replacement of wear pieces or in bad state requires a professional
intervention qualified for these tasks, so if you find any abnormality we recommend you to keep
in contact with your dealer.
STEERING SYSTEM:
OTHER PARTS OR PIECES:
15