Technical Data; Guarantee - ADE CK 1702 Bedienungsanleitung

BEWARE of material damage
‚ Protect the clock from strong impacts and vibrations.
‚ Remove the batteries from the clock, if these are used up or you are not going to
use the clock for a long period. You will thus avoid damage that may result from
the leakage of battery acid.
‚ When inserting and changing batteries, pay attention to the correct polarity (+/-).
‚ Do not subject the batteries to extreme conditions by, for example, storing them
on heaters or under direct sunlight.
Increased risk of leakage!
‚ Clean the battery and device contacts, as needed, before inserting the battery.
‚ Do not make any modifications to the item. Only allow repairs to be carried out at
a specialist workshop. Repairs carried out incorrectly can considerably endanger
the user.

Technical Data

Model:
Battery:
Rated current:
Temperature measuring range:
Distributor (no service address):
Our products are constantly being developed and improved.
For this reason, design and technical modifications are possible at any time.

Guarantee

The company Waagen-Schmitt GmbH guarantees for 2 years from the purchase date
the cost-free rectification of defects on the basis of material or fabrication errors
through repair or exchange.
In the event of a guarantee claim, please return the product with the proof of purchase
(stipulating the reason for claim) to your dealer.
DCF Radio-controlled clock CK 1702
DCF Radio-controlled clock CK 1702
2x LR6 (AA), 1.5 V
< 55 mA
approx. -10 °C - 60 °C (-4 °F - 140 °F)
Waagen-Schmitt GmbH
Hammer Steindamm 27-29
22089 Hamburg, Germany
Technical Data
17