Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3. Turn on the ON/OFF VOLUME knob on the speaker and adjust the volume to the desired listening
level.
4. Push the "SCAN" auto-tuning button to get the best tuning reception in the speakers.
When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected.
When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected.
The POWER/STEREO LED will change from red to green.
A). Keep a distance of the speaker up to 7 meters apart from transmitter, and then press "SCAN"
A). Keep a distance of the speaker up to 7 meters apart from transmitter, and then press "SCAN"
auto-tuning button for best tuning reception.
auto-tuning button for best tuning reception.
B) Whenever you fi nd frequency jam, move your channel switch from one channel to the other
B) Whenever you fi nd frequency jam, move your channel switch from one channel to the other
channel (there are two channels for selection) on the transmitter, and then press the "SCAN"
channel (there are two channels for selection) on the transmitter, and then press the "SCAN"
auto-tuning button again.
auto-tuning button again.
5. The BOOST BASS button can be used to enhance the bass sound depending on your own music
5. The BOOST BASS button can be used to enhance the bass sound depending on your own music
preferences. Turn bass/boost eff ect ON simply by pressing the button down, and pressing it once
preferences. Turn bass/boost eff ect ON simply by pressing the button down, and pressing it once
again to OFF.
13
Werbung
Inhaltsverzeichnis
Fehlerbehebung
