Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. The rear of the transmitter has one audio cord
4. The rear of the transmitter has one audio cord
that can be connected to audio output jack of TV,
that can be connected to audio output jack of TV,
Monitor, VCR, Radio recorder, CD/MP3/VCD/DVD
Monitor, VCR, Radio recorder, CD/MP3/VCD/DVD
players or to headphone/earphone jack with the
players or to headphone/earphone jack with the
connector provided.
Plug the adaptor in the AC source and connect the audio plug to the audio source. As soon as the
Plug the adaptor in the AC source and connect the audio plug to the audio source. As soon as the
transmitter is receiving the audio signal, it will automatically switch on and the red LED will illuminate
transmitter is receiving the audio signal, it will automatically switch on and the red LED will illuminate
SPEAKER RECEIVER
1. Insert 6 pieces 'AA' size ALKALINE battery into
the battery compartment with correct polarity at
the rear of the speaker or connect the 12V power
adaptor to the DC input jack on the rear of each
speaker, then plug it to the wall AC outlet.
11
Werbung
Inhaltsverzeichnis
Fehlerbehebung
