Safety Information - Ingersoll-Rand PALAIR PLUS Montage- Und Bedienungsanleitung

READ THIS MANUAL BEFORE USING THESE PRODUCTS. This
manual contains important safety, installation and operation
information.
This manual provides important information for all personnel involved with the safe installation and
operation of these products. Even if you feel you are familiar with this or similar equipment, you
should read this manual before operating the product.
Danger, Warning, Caution and Notice
Throughout this manual there are steps and procedures which, if not followed, may result in a injury.
The following signal words are used to identify the level of potential hazard.
DANGER
WARNING
CAUTION
NOTICE
Safety Summary
• Do not use this hoist or attached equipment for lifting, supporting, or transporting people or
lifting or supporting loads over people.
• The supporting structures and load-attaching devices used in conjunction with this hoist must
provide adequate support to handle all hoist operations plus the weight of the hoist and attached
equipment. This is the customer's responsibility. If in doubt, consult a registered structural
engineer.
• Lifting equipment is subject to different regulations. These regulations may not be specified in
this manual.
This manual has been produced by Ingersoll-Rand to provide dealers, mechanics, operators and
company personnel with the information required to install and operate the products described herein.
It is extremely important that mechanics and operators be familiar with the servicing procedures of
these products, or like or similar products, and are physically capable of conducting the procedures.
These personnel shall have a general working knowledge that includes:
Proper and safe use and application of mechanics common hand tools as well as special
•
Ingersoll-Rand or recommended tools.
• Safety procedures, precautions and work habits established by accepted industry standards.
Ingersoll-Rand can not know of, nor provide all the procedures by which product operations or repairs
may be conducted and the hazards and/or results of each method. If operation or maintenance
procedures not specifically recommended by the manufacturer are conducted, it must be ensured that

SAFETY INFORMATION

Danger is used to indicate the presence of a hazard which will cause
severe injury, death, or substantial property damage if the warning is
ignored.
Warning is used to indicate the presence of a hazard which can cause
severe injury, death, or substantial property damage if the warning is
ignored.
Caution is used to indicate the presence of a hazard which will or can
cause minor injury or property damage if the warning is ignored.
Notice is used to notify people of installation, operation, or maintenance
information which is important but not hazard-related.
WARNING
NOTICE
1