AEG IKE84445IB Benutzerinformation Seite 12

12 www.aeg.com
• The function activates when the total
electricity loading of the cooking
zones connected to a single phase
exceeds 3700 W.
• The function decreases the power to
the other cooking zones connected to
the same phase.
• The heat setting display of the
reduced zones changes between two
levels.
4.14 Hob²Hood
It is an advanced automatic function
which connects the hob to a special
hood. Both the hob and the hood have
an infrared signal communicator. Speed
of the fan is defined automatically on
basis of mode setting and temperature
of the hottest cookware on the hob. You
can also operate the fan from the hob
manually.
For most of the hoods the
remote system is originally
deactivated. Activate it
before you use the function.
For more information refer
to hood user manual.
Operating the function automatically
To operate the function automatically set
the automatic mode to H1 – H6. The hob
is originally set to H5. The hood reacts
whenever you operate the hob. The hob
recognizes temperature of the cookware
automatically and adjusts the speed of
the fan.
Automatic modes
Auto-
matic
light
Mode H0 Off
Mode H1 On
Mode On
3)
H2
Mode H3 On
Mode H4 On
Mode H5 On
Mode H6 On
1) The hob detects the boiling process and acti-
vates fan speed in accordance with automatic
mode.
2) The hob detects the frying process and acti-
vates fan speed in accordance with automatic
mode.
3) This mode activates the fan and the light and
does not rely on the temperature.
Changing the automatic mode
1. Deactivate the appliance.
2. Touch for 3 seconds. The display
comes on and goes off
3. Touch for 3 seconds.
4. Touch a few times until
on.
5. Touch of the Timer to select an
automatic mode.
To operate the hood directly
on the hood panel
deactivate the automatic
mode of the function.
1) 2)
Boiling Frying
Off Off
Off Off
Fan Fan
speed 1 speed 1
Off Fan
speed 1
Fan Fan
speed 1 speed 1
Fan Fan
speed 1 speed 2
Fan Fan
speed 2 speed 3
comes