Alesis SAMPLEPAD Kurzanleitung Seite 5

ADJUSTING SOUND TUNING
• Move the cursor to the Tune area by pressing the [SELECT
+] or [SELECT -] buttons.
• Then press the [VALUE +] or [VALUE -] button to adjust the
tuning. [-4, -3, -2, -1, 00, 01, 02, 03, 04]
ADJUSTING SOUND REVERB LEVEL
• Move the cursor to Reverb area by pressing the [SELECT +]
or [SELECT -] buttons.
• Then press the [VALUE +] or [VALUE -] button to
adjust the reverb level. [0~10]
ADJUSTING SENSITIVITY
• Move the cursor to the Sensitivity area by pressing the
[SELECT +] or [SELECT -] buttons.
• Then press the [VALUE +] or [VALUE -] buttons to adjust the
sensitivity level. [1~8]
ADJUSTING SOUND LEVEL
• Move the cursor to Level area by pressing the [SELECT +] or
[SELECT -] buttons.
• Then press the [VALUE +] or [VALUE -] button to adjust the
level. [0~10]
ADJUSTING SOUND PANNING
• Move the cursor to the Pan area by pressing the [SELECT +]
or [SELECT -] button.
• Then press the [VALUE +] or [VALUE -] button to adjust the
pan position. [L4, L3, L2, L1, CTR, R1, R2, R3, R4]
ADJUSTING THE MIDI NOTE FOR A SOUND
• Move the cursor to the MIDI note area by pressing the
[SELECT +] or [SELECT -] button.
• Then press the [VALUE +] or [VALUE -] button to adjust the
MIDI note number. [00~127]
Note: The MIDI note does not have an affect on the internal sound.
5