Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Taking a Photo/ Video Manually
Shot key :
Push it to take a picture any time while camera is ON even screen remaining OFF. For taking a video clip, 1
press SHOT to start taking, a stop watch counter will work and press again to stop.
Flash key:
It is an assistant feature at night before taking a manual night picture or video. Press this key to switch ON
the infrared light for 10 seconds in order to illuminate the scene in front of camera. You may view from
camera screen what will be captured in the range of dark environment before take a shot. A capture
pressing by pressing SHOT key must be made during a period of IR flash light-up. Otherwise, you may get a
black picture or video.
Display key:
Press this key time by time to turn ON screen > Remove information from screen > turn screen OFF
repeatedly.
Change Camera Capture Setting
Since camera is ON, press MENU key to enter the camera capture setting menu that consist of 7 titles:
1.
Capture Mode
a.
Exit
b.
Single (Take Picture)
c.
Video (Take Movie)
2.
Resolution
a.
Exit
b.
High (4 Mp )
c.
Normal (2.1 Mp)
d.
Basic (1.3 Mp)
3.
Quality
a.
Exit
b.
High
c.
Normal
4.
Date / Time
a.
Exit
b.
Set
c.
Stamp ON/OFF (Optional for a calendar showing on each image)
5.
TV out
a.
Exit
b.
NTSC (Default setting, Used in North America)
c.
PAL
6.
Language
a.
English
b.
French
7.
Bright-ISO
a.
Exit
b.
ISO-100 (Used for very short distance capturing setting at night to avoid images to be too much
white)
c.
Auto (Default, Recommended)
Single (Picture) Mode
The system default setting is Single Still Picture Mode for capturing colorful images at day and monochrome
images at night. Once the motion sensor does detect a motion, camera will snap it into the memory.
Scouting counter will renew the reading after each event.
Video Mode
Move the highlight to Video and press MENU key, now the VIDEO mode is selected. The unit will take video
clips day or night. Since a 1
showing you are in video mode.
In case you would switch back for Single Picture mode, just need to turn ON camera by pressing CAM-PW,
then highlight the SINGLE from Capture Mode Title. Accept it and re-boot the unit by turn off the main PW
and back ON. You will see the Video-cam icon to be disappear.
Important: If the unit detects batteries becoming too weak and an blank battery icon appear, the unit will
stop taking night pictures and take day time pictures or video only.
st
event is recorded, a video-cam icon will appear in the lower scouting LCD
st
Werbung
Inhaltsverzeichnis
