Superior SVEVA Anleitung Seite 13

Fasten the side panel [2] to the stove with the rear
bracket [F] using the screw [E] and washer [A] provided
in the kit. (Fig. 4)
Now install the other side panel, repeating the above
steps in the same order.
Offer up the trim [4] to the side panel [2] and fasten it
to the rear bracket [F] using two screws [E] provided in
the kit. (Fig. 5)
Tighten the screws [E] until the trim [4] is
resting against the side panel [2]; do not
overtighten otherwise the majolica enamel
could be damaged.
Fit the top plate [1] after ensuring that the humidifier
(optional) is properly inserted into the relative space (see
par. "HUMIDIFIER" in the booklet giving instructions
for INSTALLATION, USE AND MAINTENANCE). (Fig. 6)
Fig. 4
Fig. 5
2
Fig. 6
1
H07024030 / DT2000551-00
E
4
E
A
F
DT2032773-0
F
DT2032774-0
DT2032296-00
13