Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Facial cleansing wipes
10
Cooling application
11
(Gel pack (a), cooling glove (b))

Before starting

Preparing your skin
Your skin must be dry and free from
grease or cream.
Optional skin cooling: For the first few
epilations or if you have sensitive skin, you
can use the cooling application, recom-
mended by dermatologists to help reduce
possible skin irritation.
• Ensure that the gel pack has been in the
deep freezer (***) for at least 2 hours
(for convenience you can store the gel
packs in the freezer).
• Insert the gel pack underneath the
glove's transparent foil. Use only with
glove.
• Put transparent (cool) side of the glove
on your leg.
• Start cooling for approx. 1/2 minute,
longer if needed.
• Epilate the cooled skin area immedia-
tely as described in section «How to
epilate».
• Repeat cooling and epilating until
completion.
• While epilating, please ensure your skin
is dry.
Important: Apply cooling glove to the
same area for no longer than 2 minutes.
Keep away from sunlight. Do not use
gel pack when damaged. Dispose of in
household waste. Do not use if you are
hypersensitive, allergic to the cold, or if
your skin suffers from sensory disturb-
ances, when suffering from cardiac dis-
eases or arterial circulatory disorders.
Preparing the appliance
• Before starting, thoroughly clean the
epilation head you want to use (
• To remove the epilation head, press the
release buttons
and pull it off.
• Click the desired head into place:
– Choose the starter epilation head
if you are epilating for the first time or
if you have very sensitive skin.
– Once your skin is used to epilation,
you may switch to the standard epi-
lation head
efficient and faster epilation thanks to
its greater number of tweezers.
• Make sure that the 4-way moving pain
softener
Plug the cord connector
and plug the transformer plug
5
electrical outlet.
How to epilate
1 To turn on the appliance, slide switch
to setting «2»
4
(«2» = normal speed,
«1» = reduced speed).
2 Rub your skin to lift short hairs.
For optimum performance hold the
appliance at a right angle (90°) against
your skin. Guide it in a slow, continuous
movement without pressure against
the hair growth, in the direction of the
switch. The SoftLift
that even flat lying hair is lifted and
removed thoroughly at the root.
As hair can grow in different directions,
it may also be helpful to guide the
appliance in different directions to
achieve optimum results.
Both rollers of the 4-way moving pain
softener
contact with the skin, allowing the
pulsating movements to stimulate and
relax the skin for a gentler epilation.
If you are used to epilation and look for
a faster way to efficiently remove hair,
please use the EfficiencyPro clip
or
).
Placed on the epilator head instead
2a
2b
on the left and right
3
which allows a more
2a
is in place.
1a
into the socket
6
®
tips will make sure
should always be kept in
1a
2b
into an
7
.
1b
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5318

Inhaltsverzeichnis