JETI model MEZON PRO Benutzerhandbuch Seite 27

5 Explanation of Status
Start
Commutation - it occurs if the controller is unable to read the
Current
Temperature - it occurs if the temperature is greater than the
Control input - it occurs if the controller detects incorrect
Voltage
Capacity
Memory
- it occurs if the start sequence takes more than 3s
position of the rotor correctly
- it occurs if the current is greater than the set limit
("Limit->Maximum current")
set limit ("Limit->Maximum temperature")
throttle value
- it occurs if the voltage is less than the evaluated
cut-off voltage ("Limit->Off voltage set")
- it occurs if capacity is greater than the limit
("Limit->Elapsed capacity")
- it occurs if the memory is inconsistent and the
device is reset to factory settings
27
EN