Use And Operation - Klarstein 10026416 Anleitung

Charge Battery
1. Connect the dc plug of adapter to the unit. Plug in the adapter to the wall socket.
2. The initial charge should be a minimum of 12 hours. Subsequent re-charging will take 5-6 hours.
3. Battery indicator on LCD screen will flash whilst charging and stop flashing indicating 3 bars when fully
charged.
Position your Klarstein Blue Sun Correctly
• You should sit in a comfortable chair in front of a table or desk.
• Place Blue Sun at an angle of around 45° to the left or right of your vision directly in front of you. (See dia-
gram 1).
• Adjust stand so LED' s are directed to your eye level.
• Blue Sun should be positioned NOT CLOSER than 50cm (20 inches), AND NOT FURTHER than 70cm (30
inches) from your eyes.
• The environment where you are using Blue Sun should be a well lit room – Natural daylight or electric lighting
if it is dark.
• You can carry on doing normal activities whilst using Blue Sun ie. Reading, writing, using a computer or
watching TV.
Easy Operation
1. Press the round power button to turn on. LCD display will indicate 12:00.
2. To set the time press timer button using finger of one hand and hold down, whilst at the same time press +
or – button with finger of other hand to adjust time.
If you keep + or – button depressed, display will move very quickly! You will not need to set time again even if
unit is switched off. It will memorise the time set.
Manual Operation
Press light button and Blue LED' s will come on. Press + or – button to required level of intensity. There are 4
setting which are indicated on the LCD display. Press light button to switch off LED' s after you have ended
your session. Switch power button OFF and LCD display will disappear. (If you forget to turn power OFF, it
will Auto switch off.)
11

Use and Operation