Device Overview; Operation - Klarstein Dr. Watson Heatzone Bedienungsanleitung

EN
12
Maintenance and Cleaning
• You may only clean the heat pad. To avoid potential hazards, you must never
attempt to repair it yourself.
• Before cleaning the unit, switch it off and unplug it from the mains. Never immerse
the control unit in water or other fluids.
• Let the heat pad cool down completely before storing it. Store it in a place that is
dry and free from dust, preferably in the original packaging, until you use it next.
• If a fault occurs, do not attempt to repair the unit yourself. Repairs must only be
carried out by an authorized specialist dealer or other suitably qualified personnel.

DEVICE OVERVIEW

• Control unit with sliding switch
• Operating control display
• Cable with plug
• Heat pad
• Connection

OPERATION

Use
• You can use the heat pad to heat and relax any part of the body. Use of the heat
pad promotes blood circulation through sore muscles and increases wellbeing. The
heat pad reaches a pleasant temperature within a few minutes of switching on. The
temperature can be adjusted as required.
Operation
• Insert the mains plug into the socket and switch on the heat pad. To do this move
the switch on the control unit to position 1, 2 or 3, as required. The switch clicks into
each position. When the appliance is switched on, the regulating level appears
on the operating control display. The higher the regulating level, the higher the
temperature.
• To switch off the unit, move the switch completely back to position 0. If the operating
control display goes out, the device is switched off.
• Move the selector switch to position 1 or 2 before falling asleep or any continuous
use. The heat pad will switch off automatically after approx. 90 minutes of
continuous use.
• Unplug the unit from the mains outlet once you have finished using it.