Network - M-Life ML0670 Bedienungsanleitung

Add a new profile:
1. Click <New>.
2. Input the correct parameters you get from the operator.
3. Note: Profile Name/Number/APN is the mandatory to be filled.
4. Click <Save>.
Edit a profile:
1. Select the profile from the connection profile list.
2. Change the parameters.
3. Click <Save>.
Delete a profile:
1. Select the profile from the connection profile list.
2. Click <Delete>.
3. On the pop up dialog "are you sure to delete this profile?", click <OK>.
Note: the default profile can not be deleted.
Set as default:
1. Select the profile from the connection profile list.
2. Click <Set default>.
3. On the pop up dialog "are you sure to set this profile as default?", click <OK>.
Note: Once set the profile as default, (D) will be added as a mark.
4.5.4. Network: choose and set up preferred network settings.
Network mode: Automatic/3G only/2G only, default is automatic.
»
Network Selection: Automatic/Manual, default is automatic.
»
Select a Network Manually:
1. Choose Manual in the network selection.
2. Click <Apply>.
3. Click <Refresh> to list the available network.
4. Choose the network and Click <Select> to register..
Owner's manual
- 33 -
EN