Putting Into Operation; Cleaning And Maintenance - WMF 5 Gebrauchsanweisung

▪ The appliance is not designed for commercial purposes.
▪ In case the cord of this appliance is damaged, it has to be replaced
by an authorised service agent of the manufacturer or a person
having similar qualifications. Substantial dangers for the user can
appear from inappropriate repairs.
Grinding degree
You can adjust the desired grinding degree on the regulation wheel
(3) without settings, from 1...6 – espresso up to 17 – coarse coffee
powder. The adjustment should be done prior to filling of the coffee
beans, otherwise the beans jamming between the grinding discs might
block the motor. During the grinding procedure, the adjustment can be
changed at every time.

Putting into operation

Clean the lid (1) and the receptacle (2) for the ground material before
first use and dry it well. Put the plug into the socket. Then fill the
storing container and put the lid on.
Attention! This coffee grinder is exclusively suitable for grinding
coffee beans. The use of other grinding stock, for example poppy seed,
nuts, sugar, etc., is considered to be improper and causes the loss of
your warranty claims.
Adjust the desired number of portions by the regulation wheel for the
pre-selection (4).The grinding procedure starts after turning the start
button (5). In order to exclude the danger of injuries on the rotating
grinding discs, a security sensor avoids that the motor starts when the
receptacle is not put on properly. As soon as the adjusted quantity is
ground, the coffee mill switches off automatically. After the motor
has stopped working, pull the receptacle down when taking out. The
ground coffee can be put directly into the filter of the coffee machine.
When grinding several times, never use for more than 2 minutes.
In order to avoid a loss of the flavour, only grind the coffee beans for
immediate consumption.
Important note:
If the coffee grinder does not work, the motor might be blocked by
jammed beans. In this case, adjust the higher grinding degree by
regulation wheel. When the machine has cleared, reset to the desired
setting.

Cleaning and maintenance

After use disconnect the appliance. Never immerse the appliance in
water. Clean it with a damp cloth only. Never use scouring cleansing
agents. Residues of the coffee can be removed with a brush. If the
appliance blocks it is sufficient to grind a little amount of coffee at
highest grain size.
7