Setting Up A Wireless Lan - Canon LBP253x Handbuch Der Wlan-Einstellungen

Setting Up a Wireless LAN

Push Button Mode
1
Select <Menu> in the Home Screen.
• LBP253x
Press and tap <Menu>.
• LBP252dw/LBP251dw
Press on the operation panel.
2
Select <Network Settings>.
3
Select <Wireless LAN Settings>.
4
Read the message that is displayed, and select
<OK>.
5
Select <WPS Push Button Mode>.
Wireless LAN Settings
WPS Push Button Mode
WPS PIN Code Mode
SSID Settings
Power Save Mode
Connection Information
6
Select <Yes>.
7
Press and hold* the button until the lamp lights or
blinks.
You should press the WPS button within 2 minutes after
you select <Yes> in step 6.
* The time that you should hold the button may vary, depending
on the router you are using.
8
Wait approximately 2 minutes after the connection.
The IP address is set during this period of time.
When an error message appears:
Select <OK> to close the screen, check whether the
network key is correct, and then retry the settings. If the
access point cannot be detected even after retrying,
see the following.
e-Manual "When an Error Message Appears"
When checking the network connection:
You can check if the machine is properly connected to the
network using a computer that connected to a network.
e-Manual "Viewing Network Settings"
To set IP address manually:
e-Manual "Connecting to a Wireless LAN"
Setting the Access Point Manually
1
Check the SSID or network key for a Wireless LAN
Router/Access Point.
• Check the label on the Wireless LAN router.
• You can check the SSID or the network key using "Canon
MF / LBP Wireless Setup Assistant, " which is included in
the provided DVD-ROM supplied with the machine.
If the information of the wireless LAN router is not
displayed, click [Refresh]. If the information is not
displayed when you click [Refresh], check if the computer
settings for a wireless LAN router (access point) are
complete.
2
Write down the name of the SSID and network key
displayed in step 1. When multiple access points are
displayed, write all SSIDs that are displayed.
SSID
It is sometimes written as name of network, or name of an
access point. If there are multiple SSIDs, please write down
them all.
Network Key
It is sometimes written as PIN, WEP key, WPA/WPA2
passphrase, PSK or preshared key.
SampleABCD WEP 01234567890123456789ABCDEF
SampleEFGHIJ WPA-PSK 543210EDCBA
SampleK WPA2-PSK 1234ABCD
Proceed to the next page
En
5