Cisco SF250-48HP Kurzanleitung Seite 13

Returning the Switch to the Factory
6
Default Settings
To use the Reset button to reboot or reset the smart switch, do the
following:
• To reboot the smart switch, press the Reset button for less than 10
seconds.
• To restore the smart switch configuration to the factory default settings:
1. Disconnect the smart switch from the network or disable all DHCP
servers on your network.
2. With the power on, press and hold the Reset button for more than
10 seconds.
This is a class A product. In a domestic environment this
W
ARNING
product may cause radio interference in which case the user
may be required to take adequate measures.
Cisco 250 Series Smart Switches 13