CAMPAGNOLO 11 speed Handbuch Für Den Benutzer Seite 45

• Do not expose the products to high temperature, do not leave them closed in cars
parked under the sun, do not keep them near radiators or other heat sources, do not
leave carbon or plastic products in direct sunlight.
7.1 - PROCEDURE FOR CLEANING AND LUBRICATING THE FRONT DERAILLEUR
• Before lubricating, carefully clean the drivetrain (system, sprocket pack, chainrings
and rear derailleur wheels) with a brush or cloth soaked in a specific degreaser/deter-
gent. In the case of dust or mud, remove any residuals with specific plastic tools.
• Dry the drivetrain with a soft cloth: never use abrasive sponges or metal scouring
pads.
• Carefully lubricate the components, using a specific chain lubricant.
• After application, turn the hand cranks using all the possible gear combinations in
order to properly lubricate the entire drivetrain.
• Carefully clean any remaining lubricant remaining on the bicycle or the floor.
• At the end of the lubrication operations, CAREFULLY degrease the braking rim and
the brake blocks.
WARNING!
Residual lubricant on the rims and the brake blocks can reduce or cancel out the
braking performance of your bicycle and be the cause of accidents, physical injury
or death.
ENGLISH 45