Preparation For Use - Tokai SF-8022 Bedienungsanleitung

Unpacking and set up
2CH Multimedia Speaker System
Place the unit on a flat and stable surface so that it cannot be reversed.
Carefully remove all the components from the carton and remove all packing materials from the unit.
Make sure nothing is accidentally discarded with the packing materials.
Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not remove any
labels located on either the back or button cabinet of the unit.
Save the carton and the packing materials, if possible, in the unlikely event that the unit ever needs to be returned
for service. Using the original carton and packing material is the only proper way to protect the unit from shipping
damage.
c
IMPORTANT! It is recommended not to leave a mobile phone near the unit in order to avoid
electromagnetic interference in the speakers.
CONNECTING TO AC POWER
1.Please connect the sound sources and powers in accordance with the Sketch map.
2.When all the units are connected correctly, turn on the power switch at the rear panel of Master Tower.
3.Switch ON "Master" Tower by pressing STANDBY button or POWER button on the remote control.
4.After use, please turn OFF by pressing STANDBY button or POWER button on remote control again.
5.
ATTENTION
Please turn the volume knob to the minimum position before your operation to prevent any damage to the
speakers due to the instant impact.
Please avoid being exposed or put in humid environment.
Please do not open the back cover of the main speaker in case of getting an electric shock or breaking the
warranty regulations.
Please turn off the power switch and release the plugs if you probably do not use it within a long period.

PREPARATION FOR USE

Instruction Manual
CONNECTIONS
16
AUDIO AUX CABLE AC/DC ADAPTOR