Operation - Honeywell KaltecCool PW60A Einbauanleitung

9. Operation

9.1 Control Buttons, Display and Indicators
Display
1 Operation indicator
• Arrow lights up = valve is in operation
• Arrow flashes = regeneration at night*
2 Time
3 Reserve indicator*
4 Flow display
• Arrow flashes = water draw-off
5 Regeneration indicator
• Arrow flashes = regeneration phase is running
6 Remaining volume indicator
7 Programming Mode
• Arrow lights up = Programming Mode active
8 External*
*Display deactivated
9.2 Display during Operation
During operation the time alternates with the remaining
volume on the display. During the usage of water the
remaining volume (only treated part) decreases to ze-
ro. Afterwards – every 4 days, however, the latest – a
manual regeneration is actuated.
Time
9.3 Display during Regeneration
During regeneration the active regeneration phase is
displayed. In addition to the phase number the remai-
ning time of the active phase is also displayed. After all
6 phases have been completed, the water conditioning
device returns to normal operation.
www.honeywell.com
Residual volume (litre)
GB
Function keys
9 Start the manual regeneration
10 Programming
11 Adjusting displayed value downwards
12 Adjusting displayed value upwards
Indicator lamps
13 Chlorine generation (function not active)
14 Holiday Mode active
15 Setting the water hardness
16 Setting the capacity of the system*
17 Setting the time for regeneration at night*
18 Power indicator
The total time is between 45 and 60 minutes.
Time Example: Regeneration has reached
phase no. 3, the remaining time of
this phase is 9,3 minutes.
Phase
1 Quick flushing, formation of brine
2 Active time
3 Slow flushing
4 Quick flushing
5 Backwashing
6 Refilling
All 6 regeneration phases run in succession.
With PW 60-A phase 6 is not separately indica-
ted.
14 MU1H-1413GE23 R0807