Safety Information; Warranty; Technical Data - Nexa DRESTER 1000-IS Betriebsanleitung

In order to maintain the high safety standard of the unit, you should ensure the following:
- that the unit is installed in the manner prescribed in this manual
- that the unit is used in the manner prescribed in this manual
- that the unit is maintained in the manner prescribed in this manual
- that only original spare parts are used
- that this manual is kept available and in legible condition close to the unit.
Hedson Technologies AB will replace all faulty parts on the DRESTER 1000 with new parts in accordance with the
"Warranty Terms for Hedson Technologies AB". This warranty only remains valid if the machine is used in the prescribed
manner, and it does not cover the cost of repairs. Always state the machine's serial number and year of manufacture if
making a claim under warranty. These can be found on the machine's silver-coloured rating plate. The warranty terms may
vary from country to country. The importer can provide you with details.
Manufactured by:
Type:
Solvent capacity:
Compressed air needed:
Weight:
Dimensions:
Waterflow through the cleaning brush: 1,5-2 litres/min
Sound pressure level:
Sound power level:

SAFETY INFORMATION

WARRANTY

TECHNICAL DATA

Hedson Technologies AB
Hammarvagen 4
S-232 37 Arlov
Sweden
Tel: +46 40 53 42 00
DRESTER 1000-IS
35 litres
5-12 bar (80-180 psi),100 l/min (4 cfm)
24 kg
1180 mm high, 590 mm largest diameter
71 dB(A) at 1m distance
83 dB(A)
4