General Operation; Fitting/Removing Battery - Motorola MTS 2000 Bedienungsanleitung

GENERAL OPERATION

Fitting/Removing Battery

Before fitting or removing the battery, always
turn the radio off.
In order to fit the battery, place the two tabs
at the bottom of the battery in the corre-
sponding holes in the radio and press the
battery towards the radio until the two battery
latches (17) at the top have engaged.
Press the two battery latches (17) down and
lift the battery away from the radio.
N otes:
1: The battery must be charged before
initial use.
2: Refer to SAFETY INFORMATION for
batteries used with intrinsically safe
radios.
MTS 2000
page 4
Emergency acknowledge-
ment
Emergency exit
Failsoft (repeated every 10
seconds)
Out of range (repeated)
Keypad entry accepted
Radio self-test failed/ Key
entry not accepted/Time
out timer warning/System
reject
Low battery warning
Function/Channel/Hard-
ware error, tone continues
until valid operation or
radio turned off.
68P02100U05-A
English