Turning Scanning On/Off; Viewing A Scan List; Changing Scan Lists - Motorola MTS 2000 Bedienungsanleitung

Turning Scanning On/Off

The scanning feature may be turned on/off via
the Scan on/off selector e. g. (2) or via a menu
as previously described.
For as long as scan on is selected, the scan
icon ( ) will be on in the display and the
radio will scan the system for activity in the
modes/zones that are defined in the scan lists
of the present mode.
N ote: If the radio is pre-programmed with
auto-scanning, the radio scans automat-
ically whenever this mode is selected
and scan cannot be turned off.

Viewing a Scan List

Select the menu VIEW as previously described.
Then use
SCAN. Press the key below it to select it.
The dot in the scan icon
mode is priority 1, lights continuously
the mode is priority 2 or the icon
continuously to indicate a normal priority
mode. The programming icon
while the list is viewed.
Press (15) to view the next member.
When all members have been viewed the
function is left by pressing
Changing Scan Lists (MTS 2000 III only)
Scan lists cannot be added or deleted by the
user, but if a scan list is user programmable,
it may be changed by the user (members
added or deleted).
Select the menu PROG as previously
described:
68P02100U05-A
English
& to display the menu
flashes if the
lights
will be on
(14).
HOME
MTS 2000
page 9
if